Thursday, June 10, 2010

Results


(Y axis is meant to have a label saying "Temperature in degrees celsius" but I labelled it on my school computer rather than this one.




Wednesday, June 2, 2010

Method

This is the method I used today when conducting my experiment:

All necessary equipment was obtained from shopping centres and the household. 2.5 kilograms of sugar was split into parts of 1.5 kilograms and 1 kilogram and dissolved in 2 litres of H2O, split into parts of 1.5 litres (Solution C) and 0.5 litres (Solution A) respectively and 150 millilitres of each of these solutions was poured into measuring cylinders. Two more solutions were then made from these two basic solutions. Solution B was created from 75 millilitres of Solution A and 75 millilitres of Solution C and Solution D was created from 75 millilitres of Solution C and 75 millilitres of H2O. As a control, 150 millilitres of plain water was also used. Solutions A-D and the control were then poured into plastic cups. The plastic cups were then labelled.
The temperature of Solution A was measured using a probe thermometer and recorded.
The cup was then placed into a freezer of temperature -20OC. The temperatures of the control and of Solutions B-D were then measured and recorded and the cups placed in the freezer.
This process was repeated every 15 minutes until the solutions either froze or became too cold for the thermometer to measure. The equipment and materials were then cleaned up. The experiment was repeated.

Pictures!


Water Bottle containing saturated solution.


Examples of cups and labels.



All the cups lined up in a row. Notice the solutions become yellower as more sugar is added.



The measuring device containing the saturated solution.




The freezer they were put in.

The 25% saturated solution after the experiment was conducted.

The saturated solution after the experiment was conducted.

50% saturated solution after freezing.

The freezer space.

Tuesday, June 1, 2010

Risk Assesment

Identify: Thermometer probe is very sharp.
Assess: The probe could cut someone's hand.
Control: Hold thermometer by the display, put case on thermometer when not in use.
Disposal: Put case on thermometer at end of experiment.

Identify: Sugar solutions.
Assess: The solutions could go in someone's eye.
Control: Be very careful when handling solutions.
Disposal: Tip solutions down sink and wash away with warm water.

Identify: Ice.
Assess: Touching the ice for too long could harm someone.
Control: Close freezer, do not hold on to cups for too long after they have been frozen.
Disposal: Melt ice with warm water at the end of the experiment.

Thermometer

I finally found a thermometer that was suitable to use!!


http://www.dse.com.au/cgi-bin/dse.storefront/4c04a95402f24b1e2743c0a87e010624/Product/View/Y5118

I had to go all the way to Hurstville to get it.

SRP here I come!

Wednesday, May 12, 2010

Method For Sugar Experiment

Aim: To investigate whether the concentration of sugar in water has an effect on the freezing rate of water.

Materials: 4 x 200 mL water
400g sugar (to be split into three quantities of 66g, 134g and 200g)

Equipment:
  • 4 plastic cups
  • Freezer(set at -18°C)
  • Timer
  • Thermometer

Method:

1. Distribute materials into cups as follows:
  • 1 x tap water
  • 1 x tap water mixed with 66g of sugar
  • 1 x tap water mixed with 134g of sugar
  • 1 x tap water mixed with 200g of sugar
2. Measure the temperature of each of the solutions and alter temperature if needed to ensure a fair test.

3. Place all cups inside the freezer and begin timing.

4. Measure the temperature of the water at intervals, beginning with 20 minutes and decreasing as the solutions are near freezing point.

5. Record all data and observations.

6. Stop measuring once all 4 solutions have frozen.

7. Repeat steps 1-6 at least 3 times.

Variables

A list of variables for my sugar experiment:

Independent Variable:
1. The quantity of sugar in each cup.

Dependent Variable:
1. How long each solution will take to freeze.

Controlled Variables:
1. The temperature of the freezer.
2. Temperature of the solutions.
3. Amount of time the cups are in the freezer
3. Quantity of solutions in the cups.